Leave Your Message
Products Categories
Featured Products

Martensitic Stainless Steel ASTM A240 410

Martensitic Stainless Steel is a heat-treatable chromium stainless steel plate, known for its ability to be hardened through quenching and tempering. With chromium content typically between 11% and 17%, it offers moderate corrosion resistance but exceptional strength and hardness, making it suitable for wear-resistant applications.

Martensitic stainless steel plates are usually flat sheets with a matte to dark gray surface, often requiring heat treatment to achieve desired mechanical properties. Unlike austenitic grades, they are magnetic and can be hardened to high levels, though their ductility and weldability are lower. They are prone to corrosion in aggressive environments, thus commonly used in dry or mildly corrosive conditions, or with protective coatings. Available in various thicknesses, they are favored for components requiring high strength and edge retention.

    Brief Introduction on Martensitic Stainless Steel Plate

    Product

    Martensitic Stainless Steel Plate

    Material

    Heat-treatable chromium stainless steel

    Grade

    410 = EN 1.4006 / GB 12Cr13
    420 = EN 1.4021 / GB 20Cr13
    440C = EN 1.4125 / GB 95Cr18

    Standard

    ASTM A240, EN 10088-2, JIS G4305, GB/T 3280

    Specification

    Thickness: 0.5mm - 100mm; Width: 800mm - 2000mm; Length: 1000mm - 6000mm

    Surface

    Annealed (soft) surface, Hardened surface, Polished surface, Blasted surface

    Ends

    Ground ends, Machined ends, Sheared ends

    Applications of Martensitic Stainless Steel Plates

    Martensitic stainless steel plates are widely used in manufacturing cutting tools, such as knives and blades, due to their high hardness. They are also essential in industrial machinery for components like valves, shafts, and bearings, as well as in medical instruments requiring both strength and moderate corrosion resistance.

    Quality Control on Martensitic Stainless Steel Plates

    1 ) QC inspections focus on heat treatment parameters (hardness, microstructure) and dimensional accuracy, conducted by technicians with expertise in metallurgy.

    2) Laboratory tests include Rockwell hardness measurements, impact testing, and corrosion resistance evaluations (e.g., humidity tests).

    3) Accept third-party certifications from SGS, TÜV, or BV for critical applications like medical devices and aerospace components.

    Leave Your Message

    Your Name*

    Phone Number

    Country

    Message*