-
Steel Material
- Carbon Steel Pipe
- Stainless Steel Pipe
- Tool Steel Plate
- Alloy Steel Plate
- Carbon Steel Plate
- Special purpose steel plate
- Stainless Steel Plate
- Profile Steel
- Reinforced Bars(Rebar)
- Carbon Steel & Stainless Steel Fittings
- Carbon Steel and Stainless Steel Flanges
- Linear Motion Valves
- Rotary Motion Valves
- Special Function Valves
- Tank Prefabrication
- Piping Prefabrication
- Structural Prefabrication
- Fire Pump
3PE anti-corrosion Seamless steel pipe
Brief Introduction on 3PE anti-corrosion Seamless steel pipe
Product |
3PE anti-corrosion Seamless steel pipe; 3PE Coating Pipe |
Standard |
DIN30670,CAN/CSA-Z245.21, NFA 49-710, ISO DIS21809-1 |
Specification |
DN50-DN2200 |
Surface |
Layer 1 Epoxy Powder ≥80um, Layer 2 Adhesive:170-250um, Layer 3 Polyethylene: 1.8-3.7mm |
Ends |
Plain ends Beveled ends Threaded |
Applications on 3PE anti-corrosion Seamless steel pipe
Used for Coal mine, heat and power plant, oil and gas transmission.
Coating requirements on 3PE anti-corrosion Seamless steel pipe
1. Epoxy primer coating. The first layer with epoxy powder (FBE> 100um). Directly coated at the pipe surface. Ensure the overall coating has good adhesion at higher temperatures.
2. Copolymer adhesive. Main component for this layer is a polyolefin. The thickness of the adhesive ranges from 170um to 250um.To make sure the top anti-corrosion coating is adhesives at the primer coating and also the pipe surface.
3. Anti-corrosion Coating (PE layer). The top layer is extruded polyethylene, the thickness of this layer is from 2.5 mm to 3.7 mm. It is polyethylene which has advantages to anti-water, electrical resistance, and anti mechanical damage. It is a very important layer.



